StorCentric recently announced new Nexsan Unity storage arrays. I had the opportunity to speak to Surya Varanasi, CTO of StorCentric, about the announcement, and thought I’d share some thoughts here.
Speeds And Feeds
[image courtesy of Nexsan]
The new Unity models announced are the 3300 and 7900. Both models use two controllers and vary in capacity between 1.6PB and 6.7PB. They both use the Intel Xeon E5 v4 Family processors, and have between 256GB and 448GB of system RAM. There are hybrid storage options available, and both systems support RAID 5, 6, and 10. You can access the spec sheet here.
One of the more interesting use cases we discussed was what StorCentric refer to as “Unbreakable Backup”. The idea behind Nexsan Unbreakable Backup is that you can use your preferred data protection vendor to send backup data to a Unity array. This data can then be replicated to Nexsan’s Assureon platform. The cool thing about the Assureon is that it’s a locked down. So even if you’re hit with a ransomware attack, it’s going to be mighty hard for the bad guys to crack the Assureon platform as well, as StorCentric uses a Key Management System hosted inside StorCentric, and provides minimal privileges to end users.
There’s also a Data Mobility Suite coming at the end of Q3, including:
- Cloud Connector, giving you the ability to replicate data from Unity to 18 Public clouds including Amazon and Google (for unstructured data, cloud-based backup); and
- Flexible Data Migrations – streamline Unity implementations, migrate data from heterogeneous systems.
Thoughts and Further Reading
I’ve written enthusiastically about Assureon in the past, so it was nice to revisit the platform via this announcement. Ransomware is a scary prospect for many organisations, so a system that can integrate nicely to help with protecting protection data seems like a pretty good idea. Sure, having to replicate the data to a second system might seem like an unnecessary expense, but organisations should be assessing the value of that investment against the cost of having corporate data potentially irretrievably corrupted. Insurance against ransomware attacks probably seems like something that you shouldn’t need to spend money on, until you need to spend money recovering, or sending bitcoin to some clown because you need your data back. It’s not appealing by any stretch, but it’s also important to take precautions wherever possible.
Midrange storage is by no means a sexy topic to talk about. In my opinion it’s a well understood architecture that most tier 1 companies do pretty well nowadays. But that’s the beauty of the midrange system in a lot of ways – it’s a well understood architecture. So you generally know what you’re getting with hybrid (or all-flash) dual controller systems. The Unity range from Nexsan is no different, and that’s not a bad thing. There are a tonne of workloads in the enterprise today that aren’t necessarily well suited to cloud (for the moment), and just need some block or file storage and a bit of resiliency for good measure. The Unity series of arrays from Nexsan offer a bunch of useful features, including tiering and a variety of connectivity options. It strikes me that these arrays are a good fit for a whole lot of workloads that live in the data centre, from enterprise application hosting through to data protection workloads. If you’re after a reliable workhorse, it’s worth looking into the Unity range.