EMC – naviseccli – checking your iSCSI ports are running at the correct speed

Posted on by

It’s been a while since I wrote about naviseccli and I admit I’ve missed it. I once wrote about using naviseccli to identify MirrorView ports on a CLARiiON array. Normally the MirrorView port is consistently located, but in that example we’d upgraded from a CX3-80 to a Cx4-960 and it was in a different spot. Oh how we laughed when we realised what the problem was. Anyway, we’ve been doing some work on an ever so slightly more modern VNX5300 and needed to confirm that some newly installed iSCSI SLICs were operating at the correct speed. (Note that these commands were run from the Control Station).

The first step is to list the ports

=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2016.09.07 08:59:37 =~=~=~=~=~=~=~=~=~=~=~=
[nasadmin@NAS001 ~]$ navicli -h A_VNXSP connection -getport

SP:  A
Port ID:  8
Port WWN:  iqn.1992-04.com.emc:cx.cetv2223700017.a8
iSCSI Alias:  0017.a8
IP Address:  192.168.0.13
Subnet Mask:  255.255.255.0
Gateway Address:  192.168.0.254
Initiator Authentication:  false

SP:  A
Port ID:  9
Port WWN:  iqn.1992-04.com.emc:cx.cetv2223700017.a9
iSCSI Alias:  0017.a9

SP:  A
Port ID:  10
Port WWN:  iqn.1992-04.com.emc:cx.cetv2223700017.a10
iSCSI Alias:  017.a10

SP:  A
Port ID:  11
Port WWN:  iqn.1992-04.com.emc:cx.cetv2223700017.a11
iSCSI Alias:  017.a11

SP:  B
Port ID:  8
Port WWN:  iqn.1992-04.com.emc:cx.cetv2223700017.b8
iSCSI Alias:  0017.b8
IP Address:  192.168.0.14
Subnet Mask:  255.255.255.0
Gateway Address:  192.168.0.254
Initiator Authentication:  false

SP:  B
Port ID:  9
Port WWN:  iqn.1992-04.com.emc:cx.cetv2223700017.b9
iSCSI Alias:  0017.b9

SP:  B
Port ID:  10
Port WWN:  iqn.1992-04.com.emc:cx.cetv2223700017.b10
iSCSI Alias:  017.b10

SP:  B
Port ID:  11
Port WWN:  iqn.1992-04.com.emc:cx.cetv2223700017.b11
iSCSI Alias:  017.b11

Once you’ve done that, you can list the port speed for a particular port

[nasadmin@NAS001 ~]$ navicli -h A_VNXSP connection -getport -sp a -portid 8 -speed
SP:  A
Port ID:  8
Port WWN:  iqn.1992-04.com.emc:cx.cetv2223700017.a8
iSCSI Alias:  0017.a8
IP Address:  192.168.0.13
Subnet Mask:  255.255.255.0
Gateway Address:  192.168.0.254
Initiator Authentication:  false
Port Speed:  1000 Mb
Auto-Negotiate:  Yes
Available Speeds:  10 Mb
-               :  100 Mb
-               :  1000 Mb
-               :  Auto

If you have a lot of ports to check this may not be the most efficient way to do it (ioportconfig may be more sensible), but if your network team are reporting on one particular port being an issue – this is a great way to narrow it down.