Cohesity Basics – Configuring An External Target For Cloud Archive

I’ve been working in the lab with Pure Storage’s ObjectEngine and thought it might be nice to document the process to set it up as an external target for use with Cohesity’s Cloud Archive capability. I’ve written in the past about Cloud Tier and Cloud Archive, but in that article I focused more on the Cloud Tier capability. I don’t want to sound too pretentious, but I’ll quote myself from the other article: “With Cloud Archive you can send copies of snapshots up to the cloud to keep as a copy separate to the backup data you might have replicated to a secondary appliance. This is useful if you have some requirement to keep a monthly or six-monthly copy somewhere for compliance reasons.”

I would like to be clear that this process hasn’t been blessed or vetted by Pure Storage or Cohesity. I imagine they are working on delivering a validated solution at some stage, as they have with Veeam and Commvault. So don’t go out and jam this in production and complain to me when Pure or Cohesity tell you it’s wrong.

There are a couple of ways you can configure an external target via the Cohesity UI. In this example, I’ll do it from the dashboard, rather than during the protection job configuration. Click on Protection and select External Target.

You’ll then be presented with the New Target configuration dialogue.

In this example, I’m calling my external target PureOE, and setting its purpose as Archival (as opposed to Tiering).

The Type of target is “S3 Compatible”.

Once you select that, you’ll be asked for a bunch of S3-type information, including Bucket Name and Access Key ID. This assumes you’ve already created the bucket and configured appropriate security on the ObjectEngine side of things.

Enter the required information. I’ve de-selected compression and source side deduplication, as I’m wanting that the data reduction to be done by the ObjectEngine. I’ve also disabled encryption, as I’m guessing this will have an impact on the ObjectEngine as well. I need to confirm that with my friends at Pure. I’m using the fully qualified domain name of the ObjectEngine as the endpoint here as well.

Once you click on Register, you’ll be presented with a summary of the configuration.

You’re then right to use this as an external target for Archival parts of protection jobs within your Cohesity environment. Once you’ve run a few protection jobs, you should start to see files within the test bucket on the ObjectEngine. Don’t forget that, as fas as I’m aware, it’s still very difficult (impossible?) to remove external targets from the the Cohesity Data Platform, so don’t get too carried away with configuring a bunch of different test targets thinking that you can remove them later.