verBIOS 3 Release 6.0. Copyright 1985-2001 Phoenix Technologies Ltd. All Rights Reserved Copyright 1999-2004 by EMC Corporation, All Rights Reserved.  EMC Barracuda Release 3.70    CPU = 2 Intel(R) Xeon(TM) CPU 3.06GHz 637K System RAM Passed DQS values set to 22H 4023M Extended RAM Passed 512K Cache SRAM Passed System BIOS shadowed           Phoenix ServerBIOS 3 Release 6.0. Copyright 1985-2001 Phoenix Technologies Ltd. All Rights Reserved Copyright 1999-2004 by EMC Corporation, All Rights Reserved.  EMC Barracuda Release 3.70    CPU = 2 Intel(R) Xeon(TM) CPU 3.06GHz 637K System RAM Passed DQS values set to 22H 4023M Extended RAM Passed 512K Cache SRAM Passed System BIOS shadowed Event Log messages, enter Setup to view ERROR 0211: Keyboard error  Press to resume, to Setup      Phoenix ServerBIOS 3 Release 6.0. Copyright 1985-2001 Phoenix Technologies Ltd. All Rights Reserved Copyright 1999-2004 by EMC Corporation, All Rights Reserved.  EMC Barracuda Release 3.70    CPU = 2 Intel(R) Xeon(TM) CPU 3.06GHz 637K System RAM Passed DQS values set to 22H 4023M Extended RAM Passed 512K Cache SRAM Passed System BIOS shadowed Event Log messages, enter Setup to view ERROR 0211: Keyboard error  Press to resume, to Setup      Phoenix ServerBIOS 3 Release 6.0. Copyright 1985-2001 Phoenix Technologies Ltd. All Rights Reserved Copyright 1999-2004 by EMC Corporation, All Rights Reserved.  EMC Barracuda Release 3.70    06GHz   : 640 KB COM Ports : 03F8 02F8 0300 0308 ³  ³ Extended Memory : 4119552 KB LPT Ports : None ³  ³ Shadow Ram : 384 KB Display Type : EGA \ VGA ³  ³ Cache Ram : 512 KB PS/2 Mouse : Not Installed ³  ³ ³  ³ Hard Disk 0 : None ³  ³ Hard Disk 1 : None ³  ³ Hard Disk 2 : None ³  ³ Hard Disk 3 : None ³  ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ     Press Any Key to Continue      ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿  ³ PhoenixBIOS Setup Utility ³  ³ ³  ³ CPU Type : Intel(R) Xeon(TM) System ROMz : E93F - FFFF ³  ³ CPU Speed : 3000 MHz BIOS Date : 04/14/06 ³  ³ ³  ³ System Memory : 640 KB COM Ports : 03F8 02F8 0300 0308 ³  ³ Extended Memory : 4119552 KB LPT Ports : None ³  ³ Shadow Ram : 384 KB Display Type : EGA \ VGA ³  ³ Cache Ram : 512 KB PS/2 Mouse : Not Installed ³  ³ ³  ³ Hard Disk 0 : None ³  ³ Hard Disk 1 : None ³  ³ Hard Disk 2 : None ³  ³ Hard Disk 3 : None ³  ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ     Press Any Key to Continue      ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿  ³ PhoenixBIOS Setup Utility ³  ³ ³  ³ CPU Type : Intel(R) Xeon(TM) System ROMz : E93F - FFFF ³  ³ CPU Speed : 3000[0;  Copyright (c) EMC Corporation , 2007 Disk Array Subsystem Controller Model: CX700: SAN GBFCC4 DiagName: Extended POST DiagRev: Rev. 02.39 Build Date: Fri Jul 13 16:36:03 2007 StartTime: 01/21/2010 22:04:18 SaSerialNo: LKE00051202843 AabcdefgBC EndTime: 01/21/2010 22:04:19 .... Storage System Failure - Contact your Service Representative ... ******* ****** Aborting!!!! ****** Hit ESC to begin running diagnostic menu...  Diagnostic Menu 1) Reset Controller 21) BE1 FCC Sub-Menu 2) Enter Debugger 22) CMI0 FCC Sub-Menu 3) Display Warnings/Errors 23) CMI1 FCC Sub-Menu 4) Boot OS 24) AUX0 FCC Sub-Menu 5) POST Sub-Menu 25) AUX1 FCC Sub-Menu 6) Display/Change Privilege 26) FE0 FCC Sub-Menu 7) Boot UProc Sub-Menu 27) FE1 FCC Sub-Menu 8) Ap UProc Sub-Menu 28) FE2 FCC Sub-Menu 9) Real Time Clock Sub-Menu 29) FE3 FCC Sub-Menu 10) Pers. Module Sub-Menu 30) POST ROM Sub-Menu 11) RAM Sub-Menu 31) BIOS ROM Sub-Menu 12) NOVRAM Sub-Menu 32) System Test Sub-Menu 13) Console UART Sub-Menu 33) Image Sub-Menu 14) SPS UART Sub-Menu 34) Disk Sub-Menu 15) LCC 0 UART Sub-Menu 35) Resume PROM Sub-Menu 16) LCC 1 UART Sub-Menu 36) Voltage Margin Sub-Menu 17) LCC 2 UART Sub-Menu 37) Information Display 18) LCC 3 UART Sub-Menu 38) ICA Sub-Menu 19) LAN Service Port Sub-Menu 39) DDBS Service Sub-Menu 20) BE0 FCC Sub-Menu 40) FCC Boot Sub-Menu Enter Option : 33  Image Sub-Menu 1) Init Loop 6) Exit Loop 2) Serial Download 7) Relocate/Run Image 3) Load from disk 8) Display Sector Protection 4) Save to disk 9) Utility Partition Boot 5) Update Firmware 0) Exit Enter Option : 1 Which Back End Loop? 0 - BE Loop 0 1 - BE Loop 1 2 - AUX Loop 0 3 - AUX Loop 1 Enter number (0-3) [0]: Initializing back end FIBRE... PCI Config Reg: 2.4.1 0x0157 FCDMTL 0 [2.4.1] Dual Mode Fibre init - OSW DB PTR 0x397E4200 AG: init DMD to FC_SPEED_2_GBPS FCDMTL 0 [2.4.1] Cached memory - 0xF77B9 bytes @ 0x396EC9E0 FCDMTL 0 [2.4.1] Noncached memory - 0xC037F bytes @ 0x3962C600 (0x3962C600 phys) FCDMTL 0 [2.4.1] DVM Initialized FCDMTL 0 [2.4.1] IMQ base ptr = 396B0000; IMQ length = 8000 Dualmode fibre init completed FCDMTL 0 [2.4.1] TPM Notify: st=0xA000000, flg=0x4, cmd=0x1 FCDMTL 0 [2.4.1] TPM Hndle API Event: cntx=0x397E46C4, evnt=0x4002, info=0x0 FCDMTL 0 [2.4.1] TPM Lnk Up: state=0xA000000, flg=0x84 Link Event: 0x00030005 Device Event (0xEF): 0x00030012, tach_ptr: 0x3C0486E0 Device Event (0xE0): 0x00030012, tach_ptr: 0x3C0486E0 Device Event (0xDC): 0x00030012, tach_ptr: 0x3C0486E0 Device Event (0xDA): 0x00030012, tach_ptr: 0x3C0486E0 Device Event (0xD9): 0x00030012, tach_ptr: 0x3C0486E0 Device Event (0xD6): 0x00030012, tach_ptr: 0x3C0486E0 Device Event (0xD5): 0x00030012, tach_ptr: 0x3C0486E0 Device Event (0xD4): 0x00030012, tach_ptr: 0x3C0486E0 Device Event (0xD3): 0x00030012, tach_ptr: 0x3C0486E0 Device Event (0xD2): 0x00030012, tach_ptr: 0x3C0486E0 Device Event (0xD1): 0x00030012, tach_ptr: 0x3C0486E0 Device Event (0xE8): 0x00030012, tach_ptr: 0x3C0486E0 Device Event (0xE4): 0x00030012, tach_ptr: 0x3C0486E0 Device Event (0xE2): 0x00030012, tach_ptr: 0x3C0486E0 Device Event (0xE1): 0x00030012, tach_ptr: 0x3C0486E0 DL waited 1s for discovery Target 0 is online Target 1 is online Target 2 is online Target 3 is online Target 4 is online Target 5 is online Target 6 is online Target 7 is online Target 8 is online Target 9 is online Target 10 is online Target 11 is online Target 12 is online Target 13 is online Target 14 is online Success Hit any key to continue FCDMTL 0 [2.4.1] DVM Disc Comp- Dev List Size: 12 FCDMTL 0 [2.4.1] TPM Notify: st=0xA000000, flg=0x208, cmd=0x0 Link Event: 0x00030001  Image Sub-Menu 1) Init Loop 6) Exit Loop 2) Serial Download 7) Relocate/Run Image 3) Load from disk 8) Display Sector Protection 4) Save to disk 9) Utility Partition Boot 5) Update Firmware 0) Exit Enter Option : 9 Relocating Data Directory Boot Service (DDBS: Rev. 02.12)... DDBS: K10_REBOOT_DATA: Count = 0 DDBS: K10_REBOOT_DATA: State = 0 DDBS: K10_REBOOT_DATA: ForceDegradedMode = 0 DDBS: Read default MDDE off disk 1 DDBS: MDDE (Rev 2) on disk 1 DDBS: Read default DDE (0x40000F) off disk 1 DDBS: Read default MDDE off disk 3 DDBS: MDDE (Rev 2) on disk 3 DDBS: Read default DDE (0x400010) off disk 3 DDBS: MDB read from both disks. DDBS: DD invalid on both disks, continuing... DDBS: Disk WWN seeds match each other but not chassis WWN seed. DDBS: First disk is valid for boot. DDBS: Second disk is valid for boot. Utility Partition image (0x0040000F) located at sector LBA 0x00BE804C Disk Set: 1 3 Total Sectors: 0x00095067 Relative Sectors: 0x0000003F Calculated mirror drive geometry: Sectors: 63 Heads: 255 Cylinders: 38 Capacity: 610470 sectors Total Sectors: 0x00095067 Relative Sectors: 0x0000003F Calculated mirror drive geometry: Sectors: 63 Heads: 255 Cylinders: 38 Capacity: 610470 sectors int13 - RESET (1) int13 - READ PARAMETERS (3) int13 - RESET (5) int13 - READ PARAMETERS (7) int13 - READ PARAMETERS (24) int13 - READ PARAMETERS (611) int13 - CHECK EXTENSIONS PRESENT (612) int13 - GET DRIVE PARAMETERS (Extended) (613) int13 - READ PARAMETERS (616) int13 - CHECK EXTENSIONS PRESENT (617) int13 - GET DRIVE PARAMETERS (Extended) (618) int13 - READ PARAMETERS (620) int13 - CHECK EXTENSIONS PRESENT (621) int13 - GET DRIVE PARAMETERS (Extended) (622) int13 - READ PARAMETERS (631) int13 - CHECK EXTENSIONS PRESENT (632) int13 - GET DRIVE PARAMETERS (Extended) (633) int13 - DRIVE TYPE (648) int13 - READ PARAMETERS (649) int13 - DRIVE TYPE (650) int13 - CHECK EXTENSIONS PRESENT (652) int13 - GET DRIVE PARAMETERS (Extended) (653) int13 - READ PARAMETERS (654) int13 - CHECK EXTENSIONS PRESENT (655) int13 - GET DRIVE PARAMETERS (Extended) (656) int13 - READ PARAMETERS (666) int13 - CHECK EXTENSIONS PRESENT (667) int13 - GET DRIVE PARAMETERS (Extended) (668) int13 - READ PARAMETERS (671) int13 - CHECK EXTENSIONS PRESENT (672) int13 - GET DRIVE PARAMETERS (Extended) (673) int13 - READ PARAMETERS (676) int13 - CHECK EXTENSIONS PRESENT (677) int13 - GET DRIVE PARAMETERS (Extended) (678) int13 - READ PARAMETERS (682) int13 - CHECK EXTENSIONS PRESENT (683) int13 - GET DRIVE PARAMETERS (Extended) (684) int13 - READ PARAMETERS (686) int13 - CHECK EXTENSIONS PRESENT (687) int13 - GET DRIVE PARAMETERS (Extended) (688) int13 - READ PARAMETERS (1290) int13 - CHECK EXTENSIONS PRESENT (1291) int13 - GET DRIVE PARAMETERS (Extended) (1292) int13 - READ PARAMETERS (1307) int13 - CHECK EXTENSIONS PRESENT (1308) int13 - GET DRIVE PARAMETERS (Extended) (1309) int13 - READ PARAMETERS (1324) int13 - CHECK EXTENSIONS PRESENT (1325) int13 - GET DRIVE PARAMETERS (Extended) (1326) int13 - READ PARAMETERS (1341) int13 - CHECK EXTENSIONS PRESENT (1342) int13 - GET DRIVE PARAMETERS (Extended) (1343) int13 - READ PARAMETERS (1367) int13 - CHECK EXTENSIONS PRESENT (1368) int13 - GET DRIVE PARAMETERS (Extended) (1369) int13 - READ PARAMETERS (1435) int13 - CHECK EXTENSIONS PRESENT (1436) int13 - GET DRIVE PARAMETERS (Extended) (1437) [=2ICA::UtilityFrontEnd (c) EMC Corporation 2001-2004 All Rights Reserved DiagName: ICA::UtilityFrontEnd DiagRev: 02.16.700.5.001 StartTime: 01/21/10 22:08:37 OS Type............................WinXP SMBUS..............................Running SPID...............................Running ASIDC..............................Running ASIRAMDisk.........................Running ICA................................Running FileZilla Server...................Running Connecting to ICA..................Success SP Type............................CX700 SP ID..............................A SP Signature.......................0x08291953 Checking Image Repository.......... ICA::IRFS no valid Volume was found on this system ICA::IRFS Creating new Volume ICA::IRFS Finished creating new volume ICA::IRFS Checking Volume for consistency Sizing Image Repository............1024 MB Sizing RAM Disk....................2039 MB Discovering Management LAN Port....ManagementPort0 Checking LAN Port State............Not Configured Checking LAN Port Config...........Not Found Loading Plugins....................Done EndTime: 01/21/10 22:09:03 =============================================================================== CLARiiON Utility Toolkit Main Menu =============================================================================== 1) About the Utility Toolkit 2) About this Array 3) Reset Storage Processor 4) Image Repository Sub-Menu 5) Plugin Sub-Menu 6) NVRAM Sub-Menu 7) Enable LAN Service Port 8) Enable Engineering Mode 9) Install Images Enter Option: 7 =============================================================================== Please enter the network settings you wish to use for this SP =============================================================================== IP Address: 192.168.0.2 Subnet Mask: 255.255.255.0 Default Gateway: 192.168.0.255 Host Name: spa Domain Name: =============================================================================== Confirm Network Settings =============================================================================== IP Address: 192.168.0.2 Subnet Mask: 255.255.255.0 Default Gateway: 192.168.0.255 Host Name: spa Domain Name: Enable LAN Service Port with these settings? y/n [y] The LAN Service Port has been enabled Automatically enable the LAN Port with these settings in the future? y/n [y] n Press the Enter key to continue... =============================================================================== CLARiiON Utility Toolkit Main Menu =============================================================================== 1) About the Utility Toolkit 2) About this Array 3) Reset Storage Processor 4) Image Repository Sub-Menu 5) Plugin Sub-Menu 6) NVRAM Sub-Menu 7) View LAN Service Port Settings 8) Enable Engineering Mode 9) Install Images Enter Option: 4 =============================================================================== CLARiiON Utility Toolkit Image Repository Menu =============================================================================== 1) Back to the Main Menu 2) List Image Repository Contents 3) Delete Files from the Image Repository 4) Copy Files from the RAM Disk to the Image Repository 5) Copy Files from the Image Repository to the RAM Disk Enter Option: 4 =============================================================================== Select files to copy to the Image Repository =============================================================================== 1) FLARE.mif Enter comma separated list of options: 1 Copying FLARE.mif to the Image Repository... Success Press the Enter key to continue... =============================================================================== CLARiiON Utility Toolkit Image Repository Menu =============================================================================== 1) Back to the Main Menu 2) List Image Repository Contents 3) Delete Files from the Image Repository 4) Copy Files from the RAM Disk to the Image Repository 5) Copy Files from the Image Repository to the RAM Disk Enter Option: 1 =============================================================================== CLARiiON Utility Toolkit Main Menu =============================================================================== 1) About the Utility Toolkit 2) About this Array 3) Reset Storage Processor 4) Image Repository Sub-Menu 5) Plugin Sub-Menu 6) NVRAM Sub-Menu 7) View LAN Service Port Settings 8) Enable Engineering Mode 9) Install Images Enter Option: 9 =============================================================================== Select Images to Install =============================================================================== 1) FLARE.mif Enter comma separated list of options: 1 =============================================================================== Confirm Image Installation =============================================================================== FLARE.mif Are you sure you want to install these images? y/n [n] y =============================================================================== Select Storage Processors to install images for =============================================================================== 1) This SP (SP A) 2) Peer SP (SP B) 3) Both SP's Enter Option: 1 Installing Data Directory Boot Service 02.12 0%..10%..20%..30%..40%..50%..60%..70%..80%..90%..100% |----|----|----|----|----|----|----|----|----|----| *************************************************** The COPY operation has completed successfully. Installing BIOS 03.70 0%..10%..20%..30%..40%..50%..60%..70%..80%..90%..100% |----|----|----|----|----|----|----|----|----|----| *************************************************** The COPY operation has completed successfully. Installing Extended POST 02.38 0%..10%..20%..30%..40%..50%..60%..70%..80%..90%..100% |----|----|----|----|----|----|----|----|----|----| *************************************************** The COPY operation has completed successfully. Installing FLARE Image 02.26.700.5.005 0%..10%..20%..30%..40%..50%..60%..70%..80%..90%..100% |----|----|----|----|----|----|----|----|----|----| *************************************************** The COPY operation has completed successfully. Press the Enter key to continue... =============================================================================== CLARiiON Utility Toolkit Main Menu =============================================================================== 1) About the Utility Toolkit 2) About this Array 3) Reset Storage Processor 4) Image Repository Sub-Menu 5) Plugin Sub-Menu 6) NVRAM Sub-Menu 7) View LAN Service Port Settings 8) Enable Engineering Mode 9) Install Images Enter Option: 3 Requesting System Reset